Contact

e200 All-Electric Truck Refrigeration Unit

The e200 can help ensure your operations remain compliant with a growing array of regional and national regulations concerning the reduction of C02 emissions.

e200 All-Electric Truck Refrigeration Unit

Designed for both electric and engine-powered vehicles

The e200 can help ensure your operations remain compliant with a growing array of regional and national regulations concerning the reduction of C02 emissions. 

Features

  • With no road compressor or drive kit, all the major components are fully integrated – making it a plug and play solution
  • Controller for single and multi-temp, delivers constant capacity independent of the vehicle RPM
  • Capable of communicating with the vehicle to enhance power management
  • Smarter form of power Intelligent power source optimization to increase uptime and improved maintenance intervals
  • Variable speed compressor
  • R-452A refrigerant

The e200 all-electric truck reefer unit

e200 Van in Alley

Convenience as standard

With no road compressor or drive kit, all the e200’s major components are fully integrated – making it a plug-and-play solution that removes the headaches associated with installation.

Capacity you can rely on

With an enhanced controller, the e200 delivers constant capacity independent of the vehicle RPM.

A smarter form of power

Intelligent power source optimization gives you increased uptime and improved maintenance intervals.

A stand-out controller

  • Capable of direct communication between the unit and the vehicle to ensure compatibility with the Start & Stop feature
  • Power Management Intelligence to optimize the supply and demand of power
  • Manages alarms related across all integrated components such as inverter, new electronics, and charger

A variable speed compressor

  • Allows you to decrease the deviation of the set point, and to fully benefit from precise temperature control. 
  • Increases system reliability due to the lower number of compressor starts and stops required to function.

A tailor-made inverter

  • Provides the constant capacity needed to keep performance independent from the vehicle. 
  • Delivers exceptional operating efficiency in even the most demanding of environments. 
  • Avoids the use of a road compressor in the engine compartment, thereby making the unit easier and faster to install.
e200 glowing blue on top of a refrigerated van

A truckload of new capabilities

Turning the potential of electric into easy-to-use, intelligent, and precise temperature control.

Benefits of the e200

Quote from Chris Tanaka: Our electrified portfolio has expanded significantly and by 2023, Thermo King will have a low or zero-emission solution in every segment of the cold chain.

The e200 is eligible to receive point-of-sale discounts in California

CORE is a $125 million project, which is funded by California Climate Investments and intended to encourage California off-road equipment users to purchase or lease currently commercialized zero-emission off-road equipment. This streamlined voucher incentive project helps offset the higher cost of zero-emission technology with a point-of-sale discount.

This incentive project significantly helps customers finance their journey to achieve zero emissions by December 31, 2029, as outlined by CARB. CARB states that owners are required to turn over at least 15% of their truck TRU fleet operating in California to zero-emission technology each year beginning in 2023.

Learn more
The e200 unit is part of our all-electric portfolio

Committed to sustainability

The e200 unit is part of our all-electric portfolio, called evolve™. The evolve portfolio aligns with our customers’ goals to transition to more sustainable solutions for their fleets, and will help advance Trane Technologies’ 2030 Sustainability Commitments, including its Gigaton Challenge to reduce customer greenhouse gas emissions by 1 billion metric tons.

Unit Specs

Temperature Guide

Utilizes an R452A refrigerant system—net cooling capacity at 100°F ambient. R452A has a lower global warming potential (GWP) to help reduce the carbon footprint of refrigerants used by our customers’ long-haul, middle-mile and last-mile delivery fleets by nearly 50%.


35°F
0°F
-20°F
Truck Engine Cooling Capacity (BTU/hr)
4,700
2,700
---
Electric Standby Cooling Capacity (BTU/hr)
4,700
2,700
---

* Non-MAX units (R-134a) are rated @ 0o F but not allowed to operate below 25o F due to system protection. All standby capacities rated w/230 VAC option.


CFM
Evap Airflow
470

Engine
Electric
Coolant Heating (BTU/hr)
2,300
2,300
Hot Gas Heating (BTU/hr)
---
---

Height
Depth
Width
Dimensions
8.7 inches
21.0 inches
46.5 inches

Resources

With nearly 200 locations across North America, the Thermo King dealer network gives you the support you need, whenever and wherever you are.

Unmatched service and support

With nearly 200 locations across North America, the Thermo King dealer network gives you the support you need, whenever and wherever you are, with factory-trained expert service and genuine Thermo King parts.

Find a dealer near you